Built for the way your line actually runs.
Automated clean-in-place systems with caustic and acid tanks, heat recovery, conductivity-based recovery, and validated cleaning sequences for beverage process lines.
Manual cleaning of product-contact lines is inconsistent by nature and impossible to evidence in an audit. A CIP system runs a defined sequence — pre-rinse, caustic circulation at controlled temperature and concentration, intermediate rinse, acid circulation, final rinse and optionally a sanitiser step — and records every parameter for every circuit. Conductivity-based recovery returns usable caustic and acid to their tanks instead of to drain, which is where the operating cost saving comes from. We size the unit against the number of circuits, the longest circuit volume and your required turnaround time between products.
Who this configuration suits.
Get a detailed quote for the CIP System.
Layout drawing, utility schedule, BIS / FSSAI checklist, itemised quotation in 24 hours.
Everything we ship with this plant.
Standard turnkey scope. Optional add-ons quoted on request.
Specs at a glance.
| Tanks | 2 – 5 tank configurations |
| Circuits | 2 – 12 independently routed |
| Caustic temperature | 70 – 85°C |
| Verification | Conductivity, temperature and flow logged per phase |
| Recovery | Conductivity-based caustic and acid recovery |
| Records | Printable cleaning report per circuit per run |
| Construction | SS-304 tanks, SS-316L wetted flow path |
Price on Request.
Every plant is quoted against your capacity, feedwater analysis, plot and product mix. Send us those and you get an itemised proposal within 24 hours.
Output, degree of automation and whether you need redundancy on critical stations.
A high-TDS, iron-heavy or seasonal input changes the treatment train and its cost materially.
Machinery only, or turnkey with civil drawings, utilities, commissioning and BIS / FSSAI documentation.
Number of SKUs, bottle sizes and how fast you need to switch between them.
Common questions.
Is CIP mandatory?+
Not as a machine, but the cleaning outcome and its documentation are what FSSAI, HACCP and any serious buyer audit will examine. Beyond a small plant, achieving and evidencing that outcome manually is impractical.
How long does a CIP cycle take?+
A full caustic-plus-acid cycle typically runs 45–90 minutes per circuit depending on soil load and circuit volume. Plants running the same product continuously often use a shorter caustic-only cycle daily with a full cycle weekly.
