Built for the way your line actually runs.
Packaged sewage treatment plants using MBBR or MBR technology with tertiary polishing, producing treated water suitable for gardening, flushing and cooling tower make-up.
Any beverage plant above a modest headcount will be asked by the state pollution control board for on-site sewage treatment as a condition of consent-to-operate. Rather than treat it as a compliance cost, most of our clients recover the treated water for gardening, toilet flushing and cooling tower make-up, which meaningfully cuts fresh water draw. We supply MBBR systems for cost-sensitive installations and MBR where the treated water quality needs to be high enough for reuse inside the premises.
Who this configuration suits.
Get a detailed quote for the STP.
Layout drawing, utility schedule, BIS / FSSAI checklist, itemised quotation in 24 hours.
Everything we ship with this plant.
Standard turnkey scope. Optional add-ons quoted on request.
Specs at a glance.
| Capacity | 10 – 500 KLD |
| Technology | MBBR or MBR |
| Output BOD | < 10 mg/l (MBR), < 20 mg/l (MBBR) |
| Output TSS | < 10 mg/l |
| Reuse | Gardening, flushing, cooling tower make-up |
| Construction | RCC, FRP or MS-epoxy modular |
| Control | PLC with online monitoring interface |
Price on Request.
Every plant is quoted against your capacity, feedwater analysis, plot and product mix. Send us those and you get an itemised proposal within 24 hours.
Output, degree of automation and whether you need redundancy on critical stations.
A high-TDS, iron-heavy or seasonal input changes the treatment train and its cost materially.
Machinery only, or turnkey with civil drawings, utilities, commissioning and BIS / FSSAI documentation.
Number of SKUs, bottle sizes and how fast you need to switch between them.
Common questions.
MBBR or MBR for a beverage plant?+
MBBR is cheaper to build and run and is sufficient if you are discharging to a sewer. MBR gives you a much better effluent that can be reused inside the plant, which usually pays back through reduced fresh water draw in water-stressed districts.
Is an STP mandatory for a bottling plant?+
It depends on your headcount, discharge volume and state pollution board conditions. Most beverage plants above a modest size get it as a consent condition. We scope it during the plant layout stage so the civil provision is made from the start.