Built for the way your line actually runs.
A pre-treatment system for iron, manganese, fluoride and arsenic removal using aeration, oxidation, catalytic media filtration and selective adsorption, sized ahead of RO.
Across eastern UP, Bihar, parts of Punjab and Haryana and the whole Gangetic belt, groundwater carries iron, fluoride or arsenic at levels that will foul an RO membrane within weeks if untreated. Plants that skip this stage typically discover it as an unexplained membrane replacement bill in month four. The system aerates and oxidises dissolved ferrous iron into a filterable precipitate, removes it through catalytic media, and handles fluoride and arsenic through selective adsorption media chosen by the specific ion and its concentration. Every installation is designed against an actual raw water analysis — this is not a stock skid.
Who this configuration suits.
Get a detailed quote for the Iron / Arsenic Removal.
Layout drawing, utility schedule, BIS / FSSAI checklist, itemised quotation in 24 hours.
Everything we ship with this plant.
Standard turnkey scope. Optional add-ons quoted on request.
Specs at a glance.
| Capacity | 500 – 25,000 LPH |
| Iron removal | Up to 15 ppm feed, < 0.3 ppm output |
| Fluoride removal | Up to 10 ppm feed, < 1.0 ppm output |
| Arsenic removal | Up to 300 ppb feed, < 10 ppb output |
| Media life | 12 – 36 months, load dependent |
| Design basis | Site-specific raw water analysis required |
| Position | Upstream of RO, downstream of raw storage |
Price on Request.
Every plant is quoted against your capacity, feedwater analysis, plot and product mix. Send us those and you get an itemised proposal within 24 hours.
Output, degree of automation and whether you need redundancy on critical stations.
A high-TDS, iron-heavy or seasonal input changes the treatment train and its cost materially.
Machinery only, or turnkey with civil drawings, utilities, commissioning and BIS / FSSAI documentation.
Number of SKUs, bottle sizes and how fast you need to switch between them.
Common questions.
Can RO alone handle iron and arsenic?+
RO rejects them, but iron precipitates on the membrane surface and fouls it rapidly, and the cost shows up as membrane replacement rather than as a treatment problem. Removing iron upstream is far cheaper than replacing membranes downstream.
Do you need my water test report before quoting?+
Yes, and we will not quote this system without one. Media selection and vessel sizing depend on the specific ions, their concentrations, pH and competing anions. A generic skid will underperform within months.