Semi-Automatic PET Blow Moulding Machine (1-Cavity)
Entry-level 1-cavity PET stretch blow moulding
Output
600–1,200 bottles/hour
Power
15 kW
Price on Request · quoted to your spec
Uttar Pradesh, India
PET Blow Moulding Machine Manufacturer in Uttar Pradesh
Semi-automatic to 12-cavity rotary PET stretch blow moulding machines, preform injection moulding and in-house bottle mould tooling.
Price on Request· proposal within 24 hours
- Turnkey: civil layout to commissioning
- BIS / FSSAI documentation included
- Engineers on site across North India
- Spares and AMC after handover
Enquire for Uttar Pradesh
Quotation, layout drawing and licence checklist in 24 hours.
Overview
Supplying pet blowing plants across Uttar Pradesh.
We supply and install PET blow moulding machines in Uttar Pradesh — semi-automatic single and twin cavity units, fully automatic 4 and 6 cavity linear machines, and 6 to 12 cavity rotary blowers for high-speed lines. Machines are supplied with matched compressed air, chilling and mould tooling, because a blower specified without its utilities will not reach rated output.
Uttar Pradesh has India's largest consumer base (> 24 Cr) and one of the fastest-growing packaged water markets. With the Ganga belt offering high-TDS borewell challenges and the Awadh region's booming HORECA, mineral water plants are scaling rapidly. UP also leads in 20L jar (HOD) consumption, particularly across Lucknow, Kanpur, and Varanasi.
Market size
India's largest state population, > ₹4,200 Cr packaged drinking water market
Industrial areas we serve
NoidaGreater NoidaKanpur DehatLucknow industrial corridorAgra industrial estateGorakhpur GIDA
Response
< 4 hrs
Reply
< 24 hrs
Quote
< 7 days
Site visit
Configurations
PET Blow Moulding Machine options for Uttar Pradesh.
Every configuration below is supplied turnkey or as standalone equipment, and every one is priced on request against your capacity, feedwater and plot.
Fully-Automatic PET Blow Moulding Machine (4-Cavity Linear)
Linear 4-cavity automatic PET blowing, 4,000+ BPH
Output
3,600–4,800 bottles/hour
Power
55 kW
Price on Request · quoted to your spec
Rotary PET Blow Moulding Machine (6-Cavity)
Rotary 6-cavity blow moulding, 7,800+ BPH
Output
6,000–7,800 bottles/hour
Power
95 kW
Price on Request · quoted to your spec
20-Litre Jar PET Blow Moulding Machine
Dedicated 20L PET / PC jar blow moulding for HOD
Output
80–120 jars/hour
Power
35 kW
Price on Request · quoted to your spec
PET Preform Injection Moulding Machine
High-cavity preform injection moulding (16 to 96 cavity)
Output
8,000 – 60,000 preforms/hour
Power
85 – 320 kW
Price on Request · quoted to your spec
PET Bottle Moulds, Preform Moulds & Neck Tooling
The part of the line your bottle shape actually depends on
Output
Per bottle format
Power
N/A
Price on Request · quoted to your spec
Turnkey scope
What we deliver on a Uttar Pradesh project.
01
Machine selection
Cavity count and linear versus rotary matched to your filler speed, not to a catalogue.
02
Mould & neck tooling
Bottle design, wall thickness simulation and neck finish matched to your closure standard.
03
Compressed air
LP and 30–40 bar HP compressors with drying, filtration and air recovery, sized together with the blower.
04
Chilling
Mould cooling circuit sized for your cycle time and ambient conditions.
05
Installation & trials
Erection, trial shots, wall thickness mapping, top-load and drop testing.
06
Operator training
Heating profile setting, changeover procedure and preventive maintenance schedule.
How it runs
From first call to a running line.
1
Site & water survey
We collect your borewell analysis, plot dimensions, power sanction and target output.
2
Layout & proposal
Itemised quotation, plant layout drawing, utility schedule and a licence checklist within 24 hours.
3
Manufacturing
Fabrication, assembly and factory acceptance testing at our works, with progress photographs.
4
Installation
Erection, piping, wiring and commissioning on your site by our own engineers.
5
Trials & training
Trial production, quality validation, operator and chemist training, documented handover.
6
Service & AMC
Spares, preventive maintenance and 24×7 phone and WhatsApp support after handover.
Why Neelohith in Uttar Pradesh
Local depth, not just a delivery address.
36-hour engineer dispatch across UP zones
Service hubs in Lucknow, Kanpur and Noida
Twin-pass RO calibrated for Ganga-belt high-TDS feedwater
BIS / ISI consultation locally with UP food authority
Special pricing for FPO / SHG-led plant projects
From Uttar Pradesh
What operators tell us.
Our 60 BPM plant near Kanpur has been running for 2.5 years on 1800 ppm borewell water. The twin-pass RO and weekly auto-flush keeps the membranes healthy.
PS
Praveen Singh
Promoter · Kanpur Dehat
What people ask us
If you are searching for any of these, you are in the right place.
We answer all of it on one call — capacity sizing, licence route, plot requirement, utility load, timeline and an itemised quotation.
Ask our engineerspet blow moulding machine in Uttar Pradeshpet bottle making machine in Uttar Pradeshpet blowing machine manufacturer in Uttar Pradeshbottle blowing machine price in Uttar Pradeshpreform moulding machine in Uttar Pradeshpet bottle mould manufacturer in Uttar Pradesh
FAQ
Frequently Asked
Have a question we haven't covered? Talk to our team on WhatsApp or call us directly.
Blowing output should exceed filling output by 10–20% so the blower is never the constraint and can absorb changeover and short stops. A 60 BPM filler is comfortably fed by a 4-cavity linear machine; 120 BPM and above generally needs a 6-cavity rotary.
Other plants in Uttar Pradesh
Uttar Pradesh enquiry
Talk to us about your pet blowing project in Uttar Pradesh.
Itemised quotation, plant layout drawing and a licence checklist within 24 hours. No obligation.